PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 54844PC89
54844PC89 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.937 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.500 INCHES NOMINAL IN, overall_length: 9.750 INCHES NOMINAL IN, outside_corner_radius: 0.875 INCHES NOMINAL IN, cross-sectional_thickness: 0.187 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-399-4292, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
54844PC89
NSN: 5330-00-399-4292
FSC: 5330
CAGE: 44674 — THE OILGEAR COMPANY DBA JIFFY LUBE 213 DIV OILGEAR (USA)
SPECIFICATIONS
hole_diameter0.937 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.500 INCHES NOMINAL IN
overall_length9.750 INCHES NOMINAL IN
outside_corner_radius0.875 INCHES NOMINAL IN
cross-sectional_thickness0.187 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-399-4292
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 54844PC89 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE CORNER RADIUS: 0.875 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.937 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.187 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE CORNER RADIUS0.875 INCHES NOMINAL IN
OVERALL WIDTH6.500 INCHES NOMINAL IN
HOLE DIAMETER0.937 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH9.750 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.187 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
39661Interchangeable
interchangeable cross-reference
interchangeable
MS9532-12Interchangeable
interchangeable cross-reference
interchangeable
23131Interchangeable
interchangeable cross-reference
interchangeable
7605347Interchangeable
interchangeable cross-reference
interchangeable
D178379Interchangeable
interchangeable cross-reference
interchangeable
8M4671Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 54844PC89?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 54844PC89?
54844PC89 is a GASKET.
What parts can replace 54844PC89?
There are 9 known substitutes for 54844PC89: 39661, MS9532-12, 23131 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 54844PC89?
54844PC89 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-399-4292. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 54844PC89

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026