PartsTable
Technical Data Sheet
Download PDF

547A002915 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

547A002915: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 1.360 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN, pin_overall_diameter: 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN, first_end_taper_angle: 45.10 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-811-9214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
547A002915
NSN: 5315-00-811-9214
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.360 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
pin_overall_diameter0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
first_end_taper_angle45.10 DEGREES NOMINAL
first_end_taper_length0.010 INCHES NOMINAL IN
material_document_and_classificationQQ0S0763 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-811-9214
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 547A002915 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ0S0763 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.10 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.360 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ0S0763 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.10 DEGREES NOMINAL
PIN OVERALL DIAMETER0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.360 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
411628-9Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
13033991Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
4H5128Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2915Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S2-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 547A002915?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 547A002915?
547A002915 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 547A002915?
There are 5 known substitutes for 547A002915: 411628-9, 13033991, 4H5128 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 547A002915?
547A002915 is cataloged in the U.S. Government catalog under NSN 5315-00-811-9214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 547A002915

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.