PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5479
5479 ✓ Verified by PartsTable
Sylvanian Families · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE AND PLASTIC POLYAMIDE NYLON OVERALL, thickness: 0.1250 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM IN, body_style: STRAIGHT SHAPE, bore_shape: STRAIGHT, joint_type: SCARF-PERIPHERAL PACKING, key_height: 0.198 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5479
NSN: 3110-00-227-2344
FSC: 3110
CAGE: 81316 — PORTSMOUTH NAVAL SHIPYARD (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE AND PLASTIC POLYAMIDE NYLON OVERALL
thickness0.1250 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM IN
body_styleSTRAIGHT SHAPE
bore_shapeSTRAIGHT
joint_typeSCARF-PERIPHERAL PACKING
key_height0.198 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
head_height0.051 INCHES MINIMUM AND 0.059 INCHES MAXIMUM IN
thread_class3A A
bore_diameter20.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
head_diameter0.201 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
overall_width0.455 INCHES MINIMUM AND 0.465 INCHES MAXIMUM IN
NSN3110-00-227-2344
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5479 · Sylvanian Families ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 47.00 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
LOAD DIRECTION: ANGULAR
•
MATERIAL: NICKEL ALLOY OVERALL
•
CONTACT ANGLE: 25.0 DEGREES MINIMUM
•
BORE DIAMETER: 20.00 MILLIMETERS NOMINAL MM
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESBOTH RINGS SEPARABLE
OVERALL OUTSIDE DIAMETER47.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
LOAD DIRECTIONANGULAR
MATERIALNICKEL ALLOY OVERALL
CONTACT ANGLE25.0 DEGREES MINIMUM
BORE DIAMETER20.00 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
5479Interchangeable
interchangeable cross-reference
interchangeable
LP50P791-81MFX2Interchangeable
interchangeable cross-reference
interchangeable
845-2104599PC16Interchangeable
interchangeable cross-reference
interchangeable
MS 35756-6Interchangeable
interchangeable cross-reference
interchangeable
200119Interchangeable
interchangeable cross-reference
interchangeable
71167902Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5479?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5479?
5479 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Sylvanian Families.
What parts can replace 5479?
There are 12 known substitutes for 5479: 5479, LP50P791-81MFX2, 845-2104599PC16 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5479?
5479 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5479

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026