PartsTable
Technical Data Sheet
Download PDF

5467927 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5467927: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.495 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN, material: STEEL COMP 303 OVERALL, overall_length: 2.186 INCHES NOMINAL IN, undercut_width: 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, first_end_style: CHAMFERED, effective_length: 2.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-312-4998, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5467927
NSN: 5315-01-312-4998
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter0.495 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
materialSTEEL COMP 303 OVERALL
overall_length2.186 INCHES NOMINAL IN
undercut_width0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
first_end_styleCHAMFERED
effective_length2.000 INCHES NOMINAL IN
style_designatorGROOVE
surface_treatmentOXIDE OVERALL
undercut_diameter0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
first_end_locationBOTH ENDS
first_end_taper_angle45.0 DEGREES NOMINAL
second_undercut_width0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
NSN5315-01-312-4998
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5467927 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.015 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
DIAMETER: 0.495 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.015 INCHES NOMINAL IN
UNDERCUT DIAMETER0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
DIAMETER0.495 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
OVERALL LENGTH2.186 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 1
5468139-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5467927?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5467927?
5467927 is a PIN,GROOVED,HEADLESS.
What parts can replace 5467927?
There is 1 known substitute for 5467927: 5468139-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 5467927?
5467927 is cataloged in the U.S. Government catalog under NSN 5315-01-312-4998. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5467927

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.