PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5465F
5465F ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.875 INCHES NOMINAL IN, aperture_diameter: 4.593 INCHES MINIMUM AND 4.609 INCHES MAXIMUM IN, bolt_circle_diameter: 5.125 INCHES NOMINAL IN, outside_corner_radius: 0.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-039-6538, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5465F
NSN: 5330-00-039-6538
FSC: 5330
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.875 INCHES NOMINAL IN
aperture_diameter4.593 INCHES MINIMUM AND 4.609 INCHES MAXIMUM IN
bolt_circle_diameter5.125 INCHES NOMINAL IN
outside_corner_radius0.375 INCHES NOMINAL IN
cross-sectional_thickness0.014 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_corner_inverted_radius0.375 INCHES NOMINAL IN
side_radius_from_gasket_center2.750 INCHES NOMINAL IN
NSN5330-00-039-6538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5465F MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT CIRCLE DIAMETER: 5.125 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 2.750 INCHES NOMINAL IN
•
OUTSIDE CORNER INVERTED RADIUS: 0.375 INCHES NOMINAL IN
•
MATERIAL: CELLULOSE OVERALL
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.014 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT CIRCLE DIAMETER5.125 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER2.750 INCHES NOMINAL IN
OUTSIDE CORNER INVERTED RADIUS0.375 INCHES NOMINAL IN
MATERIALCELLULOSE OVERALL
OVERALL WIDTH5.875 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.014 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.375 INCHES NOMINAL IN
APERTURE DIAMETER4.593 INCHES MINIMUM AND 4.609 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
MIL-C-22520Interchangeable
interchangeable cross-reference
interchangeable
M22520/5-63Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-22520/5Interchangeable
interchangeable cross-reference
interchangeable
PA6070Interchangeable
interchangeable cross-reference
interchangeable
BAC1505-21915Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5465F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5465F?
5465F is a GASKET.
What parts can replace 5465F?
There are 22 known substitutes for 5465F: MIL-C-22520, M22520/5-63, MIL-C-22520/5 and 19 more. Substitute compatibility should be verified for your specific system.
Is 5465F still available?
5465F is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5465F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026