PartsTable
Technical Data Sheet
Download PDF

544973 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

544973: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 631 OVERALL, overall_width: 0.250 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.012 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN, loop_inside_diameter: 0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, material_document_and_classification: AMS 5529 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-724-0674, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
544973
NSN: 5340-00-724-0674
FSC: 5340 — Hardware, Commercial
CAGE: 45934 — ONTIC ENGINEERING & MANUFACTURING, INC DBA ONTIC US (USA)
SPECIFICATIONS
materialSTEEL COMP 631 OVERALL
overall_width0.250 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.012 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
loop_inside_diameter0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
material_document_and_classificationAMS 5529 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
NSN5340-00-724-0674
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 544973 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5529 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.012 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 631 OVERALL
•
LOOP INSIDE DIAMETER: 0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5529 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.012 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
MATERIALSTEEL COMP 631 OVERALL
LOOP INSIDE DIAMETER0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 544973?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 544973?
544973 is a CLAMP,LOOP.
What is the NSN for 544973?
544973 is cataloged in the U.S. Government catalog under NSN 5340-00-724-0674. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 544973