PartsTable
Technical Data Sheet
Download PDF

544187 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

544187: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, nut_style: HEXAGON, nut_height: 0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNS, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-188-0214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
544187
NSN: 5315-00-188-0214
NIINs: 001880214, 009171109
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
nut_styleHEXAGON
nut_height0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNS
thread_directionRIGHT-HAND
countersink_angle85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM NUT
surface_treatmentPASSIVATE OVERALL
width_across_flats0.990 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
nominal_thread_size0.688 INCHES IN
bearing_surface_typeCHAMFERED
drilled_hole_diameter0.076 INCHES NOMINAL IN
NSN5315-00-188-0214
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 544187 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES SHANK END
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: OVAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL LENGTH: 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN SIZE DESIGNATION: 2
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES SHANK END
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLEOVAL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL LENGTH1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN SIZE DESIGNATION2
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
MS24692-219Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 544187?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 544187?
544187 is a NUT,PLAIN,HEXAGON.
What parts can replace 544187?
There is 1 known substitute for 544187: MS24692-219. Substitute compatibility should be verified for your specific system.
What is the NSN for 544187?
544187 is cataloged in the U.S. Government catalog under NSN 5315-00-188-0214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 544187