PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5428269
5428269 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: RECESSED, seal_width: 0.188 INCHES NOMINAL IN, outside_diameter: 0.879 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 0.563 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-107-8011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5428269
NSN: 5330-01-107-8011
FSC: 5330
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleRECESSED
seal_width0.188 INCHES NOMINAL IN
outside_diameter0.879 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter0.563 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.561 INCHES NOMINAL IN
NSN5330-01-107-8011
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5428269 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.188 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 0.561 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
SURFACE TREATMENT: PLASTIC CASE
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
OUTSIDE DIAMETER: 0.879 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 0.563 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.188 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER0.561 INCHES NOMINAL IN
CASE STYLERECESSED
SURFACE TREATMENTPLASTIC CASE
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OUTSIDE DIAMETER0.879 INCHES NOMINAL IN
HOUSING BORE DIAMETER0.563 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
5522Interchangeable
interchangeable cross-reference
interchangeable
GC810EM2Interchangeable
interchangeable cross-reference
interchangeable
1032-5002-00Interchangeable
interchangeable cross-reference
interchangeable
579R492H02Interchangeable
interchangeable cross-reference
interchangeable
GG1105-2Interchangeable
interchangeable cross-reference
interchangeable
13217E3990Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5428269?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5428269?
5428269 is a SEAL,PLAIN ENCASED.
What parts can replace 5428269?
There are 13 known substitutes for 5428269: 5522, GC810EM2, 1032-5002-00 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5428269?
5428269 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-107-8011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5428269

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026