PartsTable
Technical Data Sheet
Download PDF

54266-3-1 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

54266-3-1: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-237-6771, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
54266-3-1
NSN: 5305-01-237-6771
FSC: 5305 — Screws
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
thread_length0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
fastener_length1.515 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
special_featuresFURNISHED WITH O-RING
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
surface_treatmentCADMIUM OVERALL
NSN5305-01-237-6771
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 54266-3-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.515 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 3-48 CAGE 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 3-48 CAGE 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.515 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION3-48 CAGE 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION3-48 CAGE 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
GRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
SPECIAL FEATURESFURNISHED WITH O-RING
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 4
3M46-3-18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT4UA-CA-3-18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT408A-3-18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HTS467-3-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 54266-3-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 54266-3-1?
54266-3-1 is a SCREW,CLOSE TOLERANCE.
What parts can replace 54266-3-1?
There are 4 known substitutes for 54266-3-1: 3M46-3-18, HT4UA-CA-3-18, HT408A-3-18 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 54266-3-1?
54266-3-1 is cataloged in the U.S. Government catalog under NSN 5305-01-237-6771. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 54266-3-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.