5424016 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

5424016: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, special_features: BOTH ENDS CENTER DRILLED, surface_treatment: CHROMATE OVERALL, pin_overall_length: 6.125 INCHES NOMINAL IN, first_hole_diameter: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-006-0819, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5424016

NSN: 5315-00-006-0819
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

material	STEEL OVERALL
first_end_style	CHAMFERED
special_features	BOTH ENDS CENTER DRILLED
surface_treatment	CHROMATE OVERALL
pin_overall_length	6.125 INCHES NOMINAL IN
first_hole_diameter	0.375 INCHES NOMINAL IN
pin_overall_diameter	0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN
second_hole_diameter	0.375 INCHES NOMINAL IN
first_end_taper_angle	45.0 DEGREES NOMINAL
first_end_taper_length	0.125 INCHES NOMINAL IN
hole_arrangement_style	BOTH END DRILLED
material_document_and_classification	FED STD 66 SAF 4140 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5315-00-006-0819

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST END TAPER LENGTH: 0.125 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

HOLE ARRANGEMENT STYLE: BOTH END DRILLED

•

FIRST END STYLE: CHAMFERED

•

FIRST HOLE DIAMETER: 0.375 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 SAF 4140 FED STD SINGLE MATERIAL RESPONSE OVERALL

•

FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL

•

PIN OVERALL DIAMETER: 0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

FIRST END TAPER LENGTH	0.125 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLE	BOTH END DRILLED
FIRST END STYLE	CHAMFERED
FIRST HOLE DIAMETER	0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	FED STD 66 SAF 4140 FED STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE	45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER	0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN
PIN OVERALL LENGTH	6.125 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

38-201-016Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 5424016?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5424016?

5424016 is a PIN,STRAIGHT,HEADLESS.

What parts can replace 5424016?

There is 1 known substitute for 5424016: 38-201-016. Substitute compatibility should be verified for your specific system.

What is the NSN for 5424016?

5424016 is cataloged in the U.S. Government catalog under NSN 5315-00-006-0819. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5424016 — PIN,STRAIGHT,HEADLESS

Request a Quote — 5424016