PartsTable
Technical Data Sheet
Download PDF

5410031 — LENS ASSY,LATERAL T

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5410031: LENS ASSY,LATERAL T.

The LENS ASSY,LATERAL T is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1070 OVERALL, hole_diameter: 0.906 INCHES NOMINAL IN, outside_diameter: 1.750 INCHES NOMINAL IN, material_thickness: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN, material_document_and_classification: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL, distance_from_centerline_to_inside_of_prebent_key: 0.656 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-541-0031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5410031
NSN: 5310-00-541-0031
NIINs: 005410031, 008322331
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1070 OVERALL
hole_diameter0.906 INCHES NOMINAL IN
outside_diameter1.750 INCHES NOMINAL IN
material_thickness0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
internal_key_quantity1
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_centerline_to_inside_of_prebent_key0.656 INCHES NOMINAL IN
NSN5310-00-541-0031
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5410031 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM CENTERLINE TO INSIDE OF PREBENT KEY: 0.656 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1070 OVERALL
•
INTERNAL KEY QUANTITY: 1
•
HOLE DIAMETER: 0.906 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM CENTERLINE TO INSIDE OF PREBENT KEY0.656 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1070 OVERALL
INTERNAL KEY QUANTITY1
HOLE DIAMETER0.906 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
8606622Reference document
Same NSN cross-reference
Reference document — Secondary reference
8609506Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5410031?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5410031?
5410031 is a LENS ASSY,LATERAL T.
What parts can replace 5410031?
There are 2 known substitutes for 5410031: 8606622, 8609506. Substitute compatibility should be verified for your specific system.
What is the NSN for 5410031?
5410031 is cataloged in the U.S. Government catalog under NSN 5310-00-541-0031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5410031