PartsTable
Technical Data Sheet
Download PDF

540784-006 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

540784-006: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321 BAND, lug_width: 1.750 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: CLAMP & BRACKET, lug_hole_diameter: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-163-9730, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
540784-006
NSN: 5340-00-163-9730
FSC: 5340 — Hardware, Commercial
CAGE: 12436 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DIV BAE SYSTEMS INFORMATION & ELECTRONIC SYSTEMS INTEGRATION INC (USA)
SPECIFICATIONS
materialSTEEL COMP 321 BAND
lug_width1.750 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
style_designatorCLAMP & BRACKET
lug_hole_diameter0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
surface_treatmentPASSIVATE BAND
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
integral_nut_type_and_quantity1 PLAIN EQUAL LENGTH TONGUES
cushioning_environmental_protectionWEATHER RESISTANT
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.367 INCHES MINIMUM AND 1.429 INCHES MAXIMUM IN
NSN5340-00-163-9730
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 540784-006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT
•
STYLE DESIGNATOR: CLAMP & BRACKET
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
LUG WIDTH: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
CUSHIONING ENVIRONMENTAL PROTECTIONWEATHER RESISTANT
STYLE DESIGNATORCLAMP & BRACKET
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
LUG WIDTH1.750 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.367 INCHES MINIMUM AND 1.429 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES1.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
10106131-6Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 540784-006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 540784-006?
540784-006 is a CLAMP,LOOP.
What parts can replace 540784-006?
There is 1 known substitute for 540784-006: 10106131-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 540784-006?
540784-006 is cataloged in the U.S. Government catalog under NSN 5340-00-163-9730. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 540784-006