PartsTable
Technical Data Sheet
Download PDF

5407 — AUTODIN INTERFACE UNIT

✓ Government record, cited
Multibrackets · MRO · MRO_GENERAL
PRODUCT OVERVIEW

5407: AUTODIN INTERFACE UNIT.

Finally a solution that gives you the highest quality of cable hide to an equal aggressive pricepoint. Match the quality in your home cinema or hifi system with equal quality when hiding your recess wiring. The M Cable Cover is a super high quality aluminium trunking system with clean Nordic design and the solution for hiding all surface wiring or pipework and suitable for Scart, HDMI, CRT, VGA and other mains leads.

Different sizes and colours give everyone the possibilityto individually choose their size and colour dependingon need. Multibrackets has a large variety of choices in both colours and lengths. The silver and black cable covers are manufactured out of adonised aluminium.

The white cable cover is coated with white paint on the anodised surface. The M Cable Cover simply screws straight to thewall to give an effective and stylish finish to your hifi or tv mounting area. Multibrackets storage and handling of aluminium parts.

It is important th This part is cataloged in the U.S. Government catalog under NSN 4730-00-010-9357, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5407
NSN: 4730-00-010-9357
NIINs: 000109357, 001564858, 001985983, 002953189, 003418866, 004919934, 005959551, 009103390, 013587568, 013601831, 015592666, 016580462
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 36251 — MCNEIL OHIO CORP (USA)
SPECIFICATIONS
angle90.0 DEGREES
height1.835 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
duty_typeCONTINUOUS
body_width0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
bore_shapeSTRAIGHT
blade_width0.625 INCHES NOMINAL IN
body_height0.065 INCHES MAXIMUM IN
body_length0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
shank_length1.250 INCHES NOMINAL IN
bore_diameter35.00 MILLIMETERS NOMINAL MM
coil_quantity2
NSN4730-00-010-9357
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 5407 · Multibrackets ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
ASSEMBLY CLEARANCE RADIUS: 0.469 INCHES NOMINAL IN
•
SHANK LENGTH: 1.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
NOMINAL THREAD SIZE: 0.125 INCHES IN
•
HEIGHT: 1.835 INCHES NOMINAL IN
•
ANGLE: 90.0 DEGREES
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
ASSEMBLY CLEARANCE RADIUS0.469 INCHES NOMINAL IN
SHANK LENGTH1.250 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
NOMINAL THREAD SIZE0.125 INCHES IN
HEIGHT1.835 INCHES NOMINAL IN
ANGLE90.0 DEGREES
SPECIAL FEATURESSURFACE LOCATED BALL CHECK VALVE
SCREW THREAD SERIES DESIGNATORPTF-SPL SHORT
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
1606BReference document
Same NSN cross-reference
Reference document — Secondary reference
109357Reference document
Same NSN cross-reference
Reference document — Secondary reference
1606Reference document
Same NSN cross-reference
Reference document — Secondary reference
PL-H200667D001 REV R IT NO 56Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
15154-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
A5407Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
Manufacturer release date (catalog record)2020-05-01
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5407?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5407?
5407 is a AUTODIN INTERFACE UNIT manufactured by Multibrackets. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5407?
There are 6 known substitutes for 5407: 1606B, 109357, 1606 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5407?
5407 is cataloged in the U.S. Government catalog under NSN 4730-00-010-9357. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5407

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.