PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 540201-009
540201-009 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.170 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-811-8387, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
540201-009
NSN: 5340-00-811-8387
FSC: 5340
CAGE: 14100 — STROMBERG-CARLSON CORP A PLESSEY TELECOMMUNICATIONS CO (USA)
SPECIFICATIONS
diameter0.170 INCHES NOMINAL IN
materialPLASTIC BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.600 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.813 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.594 INCHES NOMINAL IN
NSN5340-00-811-8387
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 540201-009 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.170 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.813 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.600 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.594 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC BAND
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.170 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.813 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.600 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.594 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
710876-9Upgraded Successor
successor cross-reference
successor
HP-9NUpgraded Successor
successor cross-reference
successor
8177337Upgraded Successor
successor cross-reference
successor
7432493P8Upgraded Successor
successor cross-reference
successor
10607442-1Upgraded Successor
successor cross-reference
successor
564088-8Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 540201-009?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 540201-009?
540201-009 is a CLAMP,LOOP.
What parts can replace 540201-009?
There are 11 known substitutes for 540201-009: 710876-9, HP-9N, 8177337 and 8 more. Substitute compatibility should be verified for your specific system.
Is 540201-009 still available?
540201-009 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 540201-009

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026