Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 3.113 INCHES MINIMUM AND 3.117 INCHES MAXIMUM IN, center_hole_diameter: 2.875 INCHES NOMINAL IN, distance_between_ends: 0.093 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-9220, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
54-94-8311
NSN:5330-00-171-9220 FSC:5330 CAGE:96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
angle
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
material
PLASTIC TETRAFLUOROETHYLENE OVERALL
joint_type
SCARF-BUTT RETAINER
peripheral_diameter
3.113 INCHES MINIMUM AND 3.117 INCHES MAXIMUM IN
center_hole_diameter
2.875 INCHES NOMINAL IN
distance_between_ends
0.093 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
cross-sectional_height
0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
cross-sectional_thickness
0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
cross-sectional_shape_style
SQUARE
material_document_and_classification
MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN
5330-00-171-9220
COMPONENT DIAGRAM
KEY FEATURES
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
JOINT TYPE: SCARF-BUTT RETAINER
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 3.113 INCHES MINIMUM AND 3.117 INCHES MAXIMUM IN
•
DISTANCE BETWEEN ENDS: 0.093 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ANGLE
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
JOINT TYPE
SCARF-BUTT RETAINER
MATERIAL
PLASTIC TETRAFLUOROETHYLENE OVERALL
CROSS-SECTIONAL SHAPE STYLE
SQUARE
CROSS-SECTIONAL HEIGHT
0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
PERIPHERAL DIAMETER
3.113 INCHES MINIMUM AND 3.117 INCHES MAXIMUM IN
DISTANCE BETWEEN ENDS
0.093 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS
0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
CENTER HOLE DIAMETER
2.875 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 54-94-8311?
54-94-8311 is a RETAINER,PACKING.
What parts can replace 54-94-8311?
There are 17 known substitutes for 54-94-8311: G23572, 56010Y, 56010 and 14 more. Substitute compatibility should be verified for your specific system.
Is 54-94-8311 still available?
54-94-8311 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.