PartsTable
Technical Data Sheet
Download PDF

53A68C98-17 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

53A68C98-17: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC EPOXY AND PAPER OVERALL, center_hole_diameter: 2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN, fsc_application_data: TANKASSEMBLY,SPRAY,CHEMICALWEAPON, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, cross-sectional_shape_style: CIRCULAR W/ APERTURE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-526-7681, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53A68C98-17
NSN: 5330-00-526-7681
FSC: 5330 — Packing and Gasket Materials
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialPLASTIC EPOXY AND PAPER OVERALL
center_hole_diameter2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN
fsc_application_dataTANKASSEMBLY,SPRAY,CHEMICALWEAPON
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
cross-sectional_shape_styleCIRCULAR W/ APERTURE
NSN5330-00-526-7681
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 53A68C98-17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: TANKASSEMBLY,SPRAY,CHEMICALWEAPON
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR W/ APERTURE
•
CENTER HOLE DIAMETER: 2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC EPOXY AND PAPER OVERALL
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATATANKASSEMBLY,SPRAY,CHEMICALWEAPON
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLECIRCULAR W/ APERTURE
CENTER HOLE DIAMETER2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN
MATERIALPLASTIC EPOXY AND PAPER OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
15719Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 53A68C98-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53A68C98-17?
53A68C98-17 is a PACKING,PREFORMED.
What parts can replace 53A68C98-17?
There is 1 known substitute for 53A68C98-17: 15719. Substitute compatibility should be verified for your specific system.
What is the NSN for 53A68C98-17?
53A68C98-17 is cataloged in the U.S. Government catalog under NSN 5330-00-526-7681. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53A68C98-17