PartsTable
Technical Data Sheet
Download PDF

53A001350E — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

53A001350E: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.125 INCHES NOMINAL IN, diameter: 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN, material: STEEL COMP B1113 OVERALL, head_style: FLAT, chamfer_length: 0.125 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-262-8120, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53A001350E
NSN: 5315-00-262-8120
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 17590 — DIAMOND POWER INTERNATIONAL, INC. (USA)
SPECIFICATIONS
height0.125 INCHES NOMINAL IN
diameter0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
materialSTEEL COMP B1113 OVERALL
head_styleFLAT
chamfer_length0.125 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.750 INCHES NOMINAL IN
under_head_length1.875 INCHES NOMINAL IN
first_hole_diameter0.141 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
distance_from_centerline_of_hole_to_end_of_pin0.250 INCHES NOMINAL IN
NSN5315-00-262-8120
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 53A001350E · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.125 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.875 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.141 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.750 INCHES NOMINAL IN
•
DIAMETER: 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.125 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.875 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.141 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.750 INCHES NOMINAL IN
DIAMETER0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
HEAD STYLEFLAT
HEIGHT0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
301158-0119Reference document
Same NSN cross-reference
Reference document — Secondary reference
FM1685DReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 53A001350E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53A001350E?
53A001350E is a PIN,STRAIGHT,HEADED.
What parts can replace 53A001350E?
There are 2 known substitutes for 53A001350E: 301158-0119, FM1685D. Substitute compatibility should be verified for your specific system.
What is the NSN for 53A001350E?
53A001350E is cataloged in the U.S. Government catalog under NSN 5315-00-262-8120. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53A001350E

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.