PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5392-6
5392-6 ✓ Verified by PartsTable
Tactic · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: STEEL COMP 4340 OR STEEL COMP 4140 OVERALL, head_style: DEE CHAMFER, grip_length: 2.570 INCHES MINIMUM AND 2.590 INCHES MAXIMUM IN, head_height: 0.500 INCHES NOMINAL IN, thread_class: 2A SINGLE THREADED PORTION A, usage_design: EXTENSION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0354, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5392-6
NSN: 5305-00-151-0354
FSC: 5305
CAGE: 60399 — REGAL-BELOIT CORPORATION DBA FASCO GROUP DIV CASSVILLE DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 OR STEEL COMP 4140 OVERALL
head_styleDEE CHAMFER
grip_length2.570 INCHES MINIMUM AND 2.590 INCHES MAXIMUM IN
head_height0.500 INCHES NOMINAL IN
thread_class2A SINGLE THREADED PORTION A
usage_designEXTENSION
head_diameter1.562 INCHES NOMINAL IN
thread_length0.688 INCHES NOMINAL SINGLE THREADED PORTION IN
screw_materialSTEEL
shank_diameter0.595 INCHES MINIMUM AND 0.605 INCHES MAXIMUM IN
detent_quantity2
fastener_length4.829 INCHES MINIMUM AND 4.890 INCHES MAXIMUM IN
NSN5305-00-151-0354
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5392-6 · Tactic ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL
•
INTERNAL DRIVE STYLE: SLOT
•
SCREW SURFACE TREATMENT: CADMIUM
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
SCREW SURFACE TREATMENTCADMIUM
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 4S STYLE
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFILLISTER
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH24
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
53926Interchangeable
interchangeable cross-reference
interchangeable
N53926Interchangeable
interchangeable cross-reference
interchangeable
19965NInterchangeable
interchangeable cross-reference
interchangeable
2006668-101Interchangeable
interchangeable cross-reference
interchangeable
2006668-103Interchangeable
interchangeable cross-reference
interchangeable
7000127821Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5392-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5392-6?
5392-6 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by Tactic.
What parts can replace 5392-6?
There are 8 known substitutes for 5392-6: 53926, N53926, 19965N and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5392-6?
5392-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0354. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5392-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026