PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 537AS282-3
537AS282-3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 5.00 MILLIMETERS NOMINAL MM, overall_width: 8.00 MILLIMETERS NOMINAL MM, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-029-1582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
537AS282-3
NSN: 3110-01-029-1582
FSC: 3110
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter5.00 MILLIMETERS NOMINAL MM
overall_width8.00 MILLIMETERS NOMINAL MM
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter9.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
NSN3110-01-029-1582
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 537AS282-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 5.00 MILLIMETERS NOMINAL MM
•
OVERALL OUTSIDE DIAMETER: 9.00 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
ALIGNMENT TYPERIGID
OVERALL WIDTH8.00 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
BORE DIAMETER5.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER9.00 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
F58Interchangeable
interchangeable cross-reference
interchangeable
6110Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 537AS282-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 537AS282-3?
537AS282-3 is a BEARING,ROLLER,NEEDLE.
What parts can replace 537AS282-3?
There are 2 known substitutes for 537AS282-3: F58, 6110. Substitute compatibility should be verified for your specific system.
What is the NSN for 537AS282-3?
537AS282-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-029-1582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 537AS282-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026