PartsTable
Technical Data Sheet
Download PDF

53711-1623055-29 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

53711-1623055-29: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316, overall_width: 1.0000 INCHES NOMINAL IN, overall_height: 1.2500 INCHES NOMINAL IN, overall_length: 2.3750 INCHES NOMINAL IN, mounting_hole_diameter: 0.3906 INCHES NOMINAL IN, material_document_and_classification: ASTM-A-276 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-432-9806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53711-1623055-29
NSN: 5340-01-432-9806
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 316
overall_width1.0000 INCHES NOMINAL IN
overall_height1.2500 INCHES NOMINAL IN
overall_length2.3750 INCHES NOMINAL IN
mounting_hole_diameter0.3906 INCHES NOMINAL IN
mounting_hole_quantity2
material_document_and_classificationASTM-A-276 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-432-9806
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 53711-1623055-29 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-A-276 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.3906 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 316
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
OVERALL HEIGHT1.2500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A-276 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.3906 INCHES NOMINAL IN
OVERALL LENGTH2.3750 INCHES NOMINAL IN
OVERALL WIDTH1.0000 INCHES NOMINAL IN
MATERIALSTEEL COMP 316
SUBSTITUTES & CROSS-REFERENCES 2
3055-9Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
803-1623055 PC 29Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 53711-1623055-29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53711-1623055-29?
53711-1623055-29 is a BRACKET,MOUNTING.
What parts can replace 53711-1623055-29?
There are 2 known substitutes for 53711-1623055-29: 3055-9, 803-1623055 PC 29. Substitute compatibility should be verified for your specific system.
What is the NSN for 53711-1623055-29?
53711-1623055-29 is cataloged in the U.S. Government catalog under NSN 5340-01-432-9806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53711-1623055-29