The Bushing,nonmetallic, cataloged under National Stock Number 5365-01-435-0933, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5365-01-435-0933 |
| Primary Part Number | 7114M42P05 |
| Item Name | Bushing,nonmetallic |
| FSC / FSG | 5365 / 53 — Bushings, Rings, Shims, and Spacers |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Body Diameter | 0.630 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN |
| Flange Diameter | 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN |
| Design Type | SINGLE CENTRALLY LOCATED HOLE |
| Style Designator | ROUND FLANGED |
| Body Length | 0.120 INCHES NOMINAL IN |
| Center Hole Diameter | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Flange Height | 0.271 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| Material | RUBBER |
| Nonmetallic Hardness Rating | 70.0 NOMINAL DUROMETER |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7114M42P05 PRIMARY | General Electric Company (USA) |
| Reference | Meaning |
|---|---|
| 7114M42P05 | 5/9 Secondary reference General Electric Company Dba Ge Structured Services Div General Electric Structured Services, Lp |
NSN 5365-01-435-0933 is a Bushing,nonmetallic, manufactured by General Electric Company, classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.
NSN 5365-01-435-0933 has 1 manufacturer part number on file: 7114M42P05 (General Electric Company).
Key specifications for 7114M42P05: Body Diameter: 0.630 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN; Flange Diameter: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN; Design Type: SINGLE CENTRALLY LOCATED HOLE; Style Designator: ROUND FLANGED. 9 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.