The Spacer,sleeve, cataloged under National Stock Number 5365-01-322-9530, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. Government technical data includes 8 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5365-01-322-9530 |
| Item Name | Spacer,sleeve |
| FSC / FSG | 5365 / 53 — Bushings, Rings, Shims, and Spacers |
| Status | ACTIVE |
| Corner Shape | SQUARE ALL CORNERS |
| Flange Outside Diameter | 0.3230 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM IN |
| Body Outside Diameter | 0.1940 INCHES MINIMUM AND 0.2040 INCHES MAXIMUM IN |
| Style Designator | SOLID, EXTERNAL FLANGE ONE END |
| Material Document and Classification | ASTM D4066 ASSN STD 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| Body Inside Diameter | 0.1400 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM IN |
| Flange Width | 0.0260 INCHES MINIMUM AND 0.0360 INCHES MAXIMUM IN |
| Material | PLASTIC POLYAMIDE NYLON OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| M45595/1-04 | 2/2 Government specification standardization U.S. Government activity |
| MIL-W-45595/1 | 4/1 Identification reference U.S. Government activity |
NSN 5365-01-322-9530 is a Spacer,sleeve, classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5310-01-327-6348. Verify interchangeability with system specifications before substitution.
Key specifications for 5365-01-322-9530: Corner Shape: SQUARE ALL CORNERS; Flange Outside Diameter: 0.3230 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM IN; Body Outside Diameter: 0.1940 INCHES MINIMUM AND 0.2040 INCHES MAXIMUM IN; Style Designator: SOLID, EXTERNAL FLANGE ONE END. 8 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.