The Shim, cataloged under National Stock Number 5365-01-320-8126, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5365-01-320-8126 |
| Primary Part Number | LO-013208126 |
| Item Name | Shim |
| FSC / FSG | 5365 / 53 — Bushings, Rings, Shims, and Spacers |
| Manufacturer | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
| Status | ACTIVE |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| Criticality Code Justification | ZZZY |
| Material Document and Classification | QQ-B-613,1/4 HARD OR HARDER FED SPEC SINGLE MATERIAL RESPONSE |
| Lamination Quantity | 63 |
| Bolt Hole Quantity | 2 |
| Lamination Thickness | 0.002 INCHES NOMINAL IN |
| Test Data Document | B1349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | COPPER ALLOY 260 |
| Hole Diameter | 0.2138 INCHES MINIMUM AND 0.2238 INCHES MAXIMUM IN |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION |
| Construction | LAMINATED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | S |
| Part Number | Manufacturer |
|---|---|
| LO-013208126 | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| Reference | Meaning |
|---|---|
| LL-H16-5057 | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| 820-5786985H01 | 3/1 Design control — primary reference Naval Sea Systems Command |
| RO0162 | 5/9 Secondary reference Dla Aviation Engineering Div Department of Defense |
NSN 5365-01-320-8126 is a Shim, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.
NSN 5365-01-320-8126 has 1 manufacturer part number on file: LO-013208126 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).
Key specifications for LO-013208126: Special Test Features: SPECIAL QUALITY CONTROL TESTING; Criticality Code Justification: ZZZY; Material Document and Classification: QQ-B-613,1/4 HARD OR HARDER FED SPEC SINGLE MATERIAL RESPONSE; Overall Length: 1.700 INCHES NOMINAL IN. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.