PartsTable TECHNICAL DATA SHEET
NSN 5365-01-248-2892Government record, cited

Bushing, Nonmetallic5365-01-248-2892

NSN 5365-01-248-2892 · NIIN 012482892
FSC 5365 — Bushings, Rings, Shims, and Spacers · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5365-01-248-2892 · 5365012482892 · NIIN 012482892 · 01-248-2892 · FSC 5365 Bushings, Rings, Shims, and Spacers · 111030-1 · LLHX4-7463
Nearby stock numbers  ·
Features
  • Bushing,nonmetallic — FSC 5365
  • Body Diameter: 5.250 INCHES NOMINAL IN
  • Design Type: SINGLE CENTRALLY LOCATED HOLE
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Criticality Code Justification: ZZZY
  • Style Designator: ROUND
  • Material Document and Classification: ZZ-R-765, CLASS 2B, GRADE 60 FED SPEC SINGLE MATERIAL RESPONSE
  • Center Hole Diameter: 3.000 INCHES NOMINAL IN
Identification
  • NSN: 5365-01-248-2892
  • NIIN: 012482892
  • FSC: 5365 — Bushings, Rings, Shims, and Spacers
  • FSG: 53 — Hardware and Abrasives
General Description

The Bushing,nonmetallic, cataloged under National Stock Number 5365-01-248-2892, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5365-01-248-2892
Item NameBushing,nonmetallic
FSC / FSG5365 / 53 — Bushings, Rings, Shims, and Spacers
StatusACTIVE
Body Diameter5.250 INCHES NOMINAL IN
Design TypeSINGLE CENTRALLY LOCATED HOLE
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Criticality Code JustificationZZZY
Style DesignatorROUND
Material Document and ClassificationZZ-R-765, CLASS 2B, GRADE 60 FED SPEC SINGLE MATERIAL RESPONSE
Center Hole Diameter3.000 INCHES NOMINAL IN
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialRUBBER SILICONE CLASS Q
Nonmetallic Hardness Rating60.0 NOMINAL DUROMETER
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeY
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5365-01-250-2294 POSSIBLE MATCH
BUSHING,NONMETALLIC
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
111030-1 3/1 Design control — primary reference
U.S. Government activity
LLHX4-7463 5/9 Secondary reference
Defense Logistics Agency Dba Defense Supply Center Philadelphia
Related Parts
5365-01-250-2294POSSIBLE MATCH
BUSHING,NONMETALLIC

Frequently Asked Questions

What is NSN 5365-01-248-2892?

NSN 5365-01-248-2892 is a Bushing,nonmetallic, classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.

What NSN replaces 5365-01-248-2892?

1 possible match (shared part number, not a government interchangeability claim): 5365-01-250-2294. Verify interchangeability with system specifications before substitution.

What are the specifications of 5365-01-248-2892?

Key specifications for 5365-01-248-2892: Body Diameter: 5.250 INCHES NOMINAL IN; Design Type: SINGLE CENTRALLY LOCATED HOLE; Special Test Features: SPECIAL QUALITY CONTROL TESTING; Criticality Code Justification: ZZZY. 11 specifications are documented in the U.S. Government catalog.

Is NSN 5365-01-248-2892 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com