The Spacer,sleeve, cataloged under National Stock Number 5365-01-237-5303, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. The manufacturer of record is Saint-Gobain Performance Plastics Corporation. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5365-01-237-5303 |
| Primary Part Number | 11490AJ |
| Item Name | Spacer,sleeve |
| FSC / FSG | 5365 / 53 — Bushings, Rings, Shims, and Spacers |
| Manufacturer | Saint-Gobain Performance Plastics Corporation |
| Status | ACTIVE |
| Flange Outside Diameter | 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM IN |
| Body Outside Diameter | 0.1360 INCHES MINIMUM AND 0.1400 INCHES MAXIMUM IN |
| Body Inside Diameter | 0.1100 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM IN |
| Flange Width | 0.0620 INCHES NOMINAL IN |
| Material | PLASTIC POLYTETRAFLUOROETHYLENE OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 11490AJ PRIMARY | Saint-Gobain Performance Plastics Corporation (USA) |
| Reference | Meaning |
|---|---|
| SM-A-959315-3 | 5/2 Secondary reference U.S. Government activity |
| 11464665-4 | 7/2 Vendor item drawing reference Us Army Aviation and Missile Command |
NSN 5365-01-237-5303 is a Spacer,sleeve, manufactured by Saint-Gobain Performance Plastics Corporation, classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.
NSN 5365-01-237-5303 has 1 manufacturer part number on file: 11490AJ (Saint-Gobain Performance Plastics Corporation).
Key specifications for 11490AJ: Flange Outside Diameter: 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM IN; Body Outside Diameter: 0.1360 INCHES MINIMUM AND 0.1400 INCHES MAXIMUM IN; Overall Length: 0.1150 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN; Body Inside Diameter: 0.1100 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM IN. 5 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.