The Retainer,guide, cataloged under National Stock Number 5365-01-210-0933, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. Government technical data includes 1 specification, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5365-01-210-0933 |
| Item Name | Retainer,guide |
| FSC / FSG | 5365 / 53 — Bushings, Rings, Shims, and Spacers |
| Status | ACTIVE |
| General Characteristics Item Description | ITEM IS A C-SHAPED RING;ITEM HAS A 14.25 DEG. BEVEL ON ONE SIDE; ITEM HAS A 8.0 DEG. BORE TAPER FROM FLAT SIDE TO BEVEL SIDE; ITEM HAS 3 THRU THREADED HOLES 0.138 INCH,UNF THREAD,CLASS 2R; THREADED HOLES ARELOCATED ON THE THICK EDGE OF THE PERIPHERY;ITEM HAS 2 THRU DRILLED HOLES 0.062 IN. DIA. IN FACE NEAR CUTOFF EDGE; ITEM OUTSIDE DIA. 2.600 IN. NOMINAL;ITEM MAJOR THICKNESS 0.664 IN.;ITEM MINOR THICKNESS 0.060 IN.;ITEM WIDTH TO CUTOFF 2.362 IN. NOMINAL;ITEM BEVEL FACE 32.0 MICRON SURFACE FINISH IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 729918 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5365-01-210-0933 is a Retainer,guide, classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.
Key specifications for 5365-01-210-0933: General Characteristics Item Description: ITEM IS A C-SHAPED RING;ITEM HAS A 14.25 DEG. BEVEL ON ONE SIDE; ITEM HAS A 8.0 DEG. BORE TAPER FROM FLAT SIDE TO BEVEL SIDE; ITEM HAS 3 THRU THREADED HOLES 0.138 INCH,UNF THREAD,CLASS 2R; THREADED HOLES ARELOCATED ON THE THICK EDGE OF THE PERIPHERY;ITEM HAS 2 THRU DRILLED HOLES 0.062 IN. DIA. IN FACE NEAR CUTOFF EDGE; ITEM OUTSIDE DIA. 2.600 IN. NOMINAL;ITEM MAJOR THICKNESS 0.664 IN.;ITEM MINOR THICKNESS 0.060 IN.;ITEM WIDTH TO CUTOFF 2.362 IN. NOMINAL;ITEM BEVEL FACE 32.0 MICRON SURFACE FINISH IN. 1 specification is documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.