The Bushing,tapered, cataloged under National Stock Number 5365-01-197-1634, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. The manufacturer of record is Unicorp.. Government technical data includes 7 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5365-01-197-1634 |
| Primary Part Number | 14-124-4 |
| Item Name | Bushing,tapered |
| FSC / FSG | 5365 / 53 — Bushings, Rings, Shims, and Spacers |
| Manufacturer | Unicorp. |
| Status | ACTIVE |
| Surface Treatment Document and Classification | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| Tapered Portion Length | 0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN |
| Large End Outside Diameter | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-A-225/8, ALLOY 6061, T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/10, ALLOY 6262, T9 FED SPEC 2ND MATERIAL RESPONSE |
| Inside Diameter | 0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN |
| Surface Treatment | ANODIZE |
| Material | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 14-124-4 PRIMARY | Unicorp. (USA) |
| Reference | Meaning |
|---|---|
| 172B5264P1 | 7/2 Vendor item drawing reference U.S. Government activity |
NSN 5365-01-197-1634 is a Bushing,tapered, manufactured by Unicorp., classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.
NSN 5365-01-197-1634 has 1 manufacturer part number on file: 14-124-4 (Unicorp.).
Key specifications for 14-124-4: Surface Treatment Document and Classification: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE; Tapered Portion Length: 0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN; Large End Outside Diameter: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN; Material Document and Classification: QQ-A-225/8, ALLOY 6061, T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/10, ALLOY 6262, T9 FED SPEC 2ND MATERIAL RESPONSE. 7 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.