The Bushing,tapered, cataloged under National Stock Number 5365-01-101-8260, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. The manufacturer of record is Hyster-Yale Group, Inc. Div Hyster-Yale Materials Handling. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5365-01-101-8260 |
| Primary Part Number | 153778 |
| Item Name | Bushing,tapered |
| FSC / FSG | 5365 / 53 — Bushings, Rings, Shims, and Spacers |
| Manufacturer | Hyster-Yale Group, Inc. Div Hyster-Yale Materials Handling |
| Status | ACTIVE |
| Tapered Portion Length | 0.421 INCHES NOMINAL IN |
| Large End Outside Diameter | 0.890 INCHES NOMINAL IN |
| Inside Diameter | 0.503 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN |
| Split Width | 0.079 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN |
| Taper Included Angle | 26 DEGREES 30 MINUTES |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 153778 PRIMARY | Hyster-Yale Group, Inc. Div Hyster-Yale Materials Handling (USA) |
| Reference | Meaning |
|---|---|
| 153778 | 5/9 Secondary reference Hyster-Yale Group, Inc. |
NSN 5365-01-101-8260 is a Bushing,tapered, manufactured by Hyster-Yale Group, Inc. Div Hyster-Yale Materials Handling, classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.
NSN 5365-01-101-8260 has 1 manufacturer part number on file: 153778 (Hyster-Yale Group, Inc. Div Hyster-Yale Materials Handling).
Key specifications for 153778: Tapered Portion Length: 0.421 INCHES NOMINAL IN; Large End Outside Diameter: 0.890 INCHES NOMINAL IN; Overall Length: 0.405 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN; Inside Diameter: 0.503 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN. 5 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.