The Spacer,sleeve, cataloged under National Stock Number 5365-01-080-9490, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. The manufacturer of record is Testek Llc Dba Testek Solutions. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5365-01-080-9490 |
| Primary Part Number | 10466-32 |
| Item Name | Spacer,sleeve |
| FSC / FSG | 5365 / 53 — Bushings, Rings, Shims, and Spacers |
| Manufacturer | Testek Llc Dba Testek Solutions |
| Status | ACTIVE |
| Corner Shape | SQUARE ALL CORNERS |
| Left End Body Diameter | 0.5280 INCHES MINIMUM AND 0.5290 INCHES MAXIMUM IN |
| Flange Outside Diameter | 0.6130 INCHES MINIMUM AND 0.6150 INCHES MAXIMUM IN |
| End to Flange Distance | 0.1800 INCHES NOMINAL IN |
| Style Designator | SOLID, EXTERNAL FLANGE |
| Material Document and Classification | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Body Inside Diameter | 0.4380 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM IN |
| Right End Body Diameter | 0.5280 INCHES MINIMUM AND 0.5290 INCHES MAXIMUM IN |
| Surface Treatment | ANODIZE OVERALL |
| Flange Width | 0.0700 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 6061 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 10466-32 PRIMARY | Testek Llc Dba Testek Solutions (USA) |
NSN 5365-01-080-9490 is a Spacer,sleeve, manufactured by Testek Llc Dba Testek Solutions, classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.
NSN 5365-01-080-9490 has 1 manufacturer part number on file: 10466-32 (Testek Llc Dba Testek Solutions).
Key specifications for 10466-32: Corner Shape: SQUARE ALL CORNERS; Left End Body Diameter: 0.5280 INCHES MINIMUM AND 0.5290 INCHES MAXIMUM IN; Flange Outside Diameter: 0.6130 INCHES MINIMUM AND 0.6150 INCHES MAXIMUM IN; End to Flange Distance: 0.1800 INCHES NOMINAL IN. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.