PartsTable TECHNICAL DATA SHEET
NSN 5365-01-066-6850Government record, cited

Spacer, Ring5365-01-066-6850

NSN 5365-01-066-6850 · NIIN 010666850
FSC 5365 — Bushings, Rings, Shims, and Spacers · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5365-01-066-6850 · 5365010666850 · NIIN 010666850 · 01-066-6850 · FSC 5365 Bushings, Rings, Shims, and Spacers
Nearby stock numbers  ·
Features
  • Spacer,ring — FSC 5365
  • Surface Finish: 125.0 MICROINCHES RIGHT SIDE
  • Surface Finish: 125.0 MICROINCHES LEFT SIDE
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Outside Diameter: 10.840 INCHES MINIMUM AND 10.900 INCHES MAXIMUM IN
  • Overall Thickness: 0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
  • Material Document and Classification: ASACRON 773 CAGE 19121 MFR REF SINGLE MATERIAL RESPONSE OR SAE 660 ASSN STD SINGLE MATERIAL RESPONSE
  • Inside Diameter: 8.870 INCHES MINIMUM AND 9.120 INCHES MAXIMUM IN
Identification
  • NSN: 5365-01-066-6850
  • NIIN: 010666850
  • FSC: 5365 — Bushings, Rings, Shims, and Spacers
  • FSG: 53 — Hardware and Abrasives
General Description

The Spacer,ring, cataloged under National Stock Number 5365-01-066-6850, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5365-01-066-6850
Item NameSpacer,ring
FSC / FSG5365 / 53 — Bushings, Rings, Shims, and Spacers
StatusACTIVE
Surface Finish125.0 MICROINCHES RIGHT SIDE
Surface Finish125.0 MICROINCHES LEFT SIDE
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Outside Diameter10.840 INCHES MINIMUM AND 10.900 INCHES MAXIMUM IN
Overall Thickness0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
Material Document and ClassificationASACRON 773 CAGE 19121 MFR REF SINGLE MATERIAL RESPONSE OR SAE 660 ASSN STD SINGLE MATERIAL RESPONSE
Inside Diameter8.870 INCHES MINIMUM AND 9.120 INCHES MAXIMUM IN
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialCOPPER ALLOY 932
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeS
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
F-412-6334 3/9 Design control — primary reference
Bingham-Willamette Co Div of Guy F Atkinson Co
No interchangeability data on file.
Other items in FSC 5365 — Bushings, Rings, Shims, and Spacers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5365-00-000-6078
5365-00-000-6078 · Item name not on file
5365-00-000-7436
5365-00-000-7436 · Item name not on file
5365-00-001-1292
PLUG,MACHINE THREAD
5365-00-001-1365
5365-00-001-1365 · Item name not on file
5365-00-001-1841
RING,TORQUE,TUBE,INBOARD,RUDDER
5365-00-001-1915
5365-00-001-1915 · Item name not on file
5365-00-001-1916
5365-00-001-1916 · Item name not on file
5365-00-001-1940
5365-00-001-1940 · Item name not on file

Frequently Asked Questions

What is NSN 5365-01-066-6850?

NSN 5365-01-066-6850 is a Spacer,ring, classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.

What are the specifications of 5365-01-066-6850?

Key specifications for 5365-01-066-6850: Surface Finish: 125.0 MICROINCHES RIGHT SIDE; Surface Finish: 125.0 MICROINCHES LEFT SIDE; Special Test Features: SPECIAL QUALITY CONTROL TESTING; Outside Diameter: 10.840 INCHES MINIMUM AND 10.900 INCHES MAXIMUM IN. 10 specifications are documented in the U.S. Government catalog.

Is NSN 5365-01-066-6850 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com