The Shim, cataloged under National Stock Number 5365-01-009-7444, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. The manufacturer of record is Honeywell International Inc. Div Aerospace - Torrance. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5365-01-009-7444 |
| Primary Part Number | 202057-3 |
| Item Name | Shim |
| FSC / FSG | 5365 / 53 — Bushings, Rings, Shims, and Spacers |
| Manufacturer | Honeywell International Inc. Div Aerospace - Torrance |
| Status | ACTIVE |
| Material Document and Classification | MIL-S-5059,COND 1/4 OR 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5059 COND A MIL SPEC SINGLE MATERIAL RESPONSE |
| Smallest Bolt Hole Diameter | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN |
| Outside Diameter | 5.230 INCHES MINIMUM AND 5.250 INCHES MAXIMUM IN |
| Aperture Diameter | 4.520 INCHES MINIMUM AND 4.540 INCHES MAXIMUM IN |
| Bolt Hole Quantity | 10 |
| Bolt Circle Diameter | 4.875 INCHES NOMINAL IN |
| Largest Bolt Hole Diameter | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Material | STEEL COMP 301 OR STEEL COMP 302 |
| Construction | ONE-PIECE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 202057-3 PRIMARY | Honeywell International Inc. Div Aerospace - Torrance (USA) |
NSN 5365-01-009-7444 is a Shim, manufactured by Honeywell International Inc. Div Aerospace - Torrance, classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.
NSN 5365-01-009-7444 has 1 manufacturer part number on file: 202057-3 (Honeywell International Inc. Div Aerospace - Torrance).
Key specifications for 202057-3: Material Document and Classification: MIL-S-5059,COND 1/4 OR 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5059 COND A MIL SPEC SINGLE MATERIAL RESPONSE; Smallest Bolt Hole Diameter: 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN; Outside Diameter: 5.230 INCHES MINIMUM AND 5.250 INCHES MAXIMUM IN; Aperture Diameter: 4.520 INCHES MINIMUM AND 4.540 INCHES MAXIMUM IN. 9 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.