The Spacer,ring, cataloged under National Stock Number 5365-00-903-4647, is classified within Federal Supply Class 5365 (Bushings, Rings, Shims, and Spacers) of the Hardware and Abrasives group. The manufacturer of record is Md Helicopters Inc. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5365-00-903-4647 |
| Primary Part Number | 369A5360 |
| Item Name | Spacer,ring |
| FSC / FSG | 5365 / 53 — Bushings, Rings, Shims, and Spacers |
| Manufacturer | Md Helicopters Inc |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES LARGEST OUTSIDE DIAMETER |
| Surface Finish | 32.0 MICROINCHES RIGHT SIDE |
| Surface Finish | 32.0 MICROINCHES LEFT SIDE |
| Surface Finish | 125.0 MICROINCHES BORE |
| Surface Treatment Document and Classification | MIL-C-13924,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| Outside Diameter | 2.247 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM |
| Material Document and Classification | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE |
| Inside Diameter | 1.750 INCHES NOMINAL IN |
| Surface Treatment | OXIDE |
| Material | STEEL COMP 4130 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 369A5360 PRIMARY | Md Helicopters Inc (USA) |
| Reference | Meaning |
|---|---|
| 369A5360 | 5/9 Secondary reference Mcdonnell Douglas Helicopter Co Inc |
NSN 5365-00-903-4647 is a Spacer,ring, manufactured by Md Helicopters Inc, classified under FSC 5365, Bushings, Rings, Shims, and Spacers. Status: active.
NSN 5365-00-903-4647 has 1 manufacturer part number on file: 369A5360 (Md Helicopters Inc).
Key specifications for 369A5360: Surface Finish: 125.0 MICROINCHES LARGEST OUTSIDE DIAMETER; Surface Finish: 32.0 MICROINCHES RIGHT SIDE; Surface Finish: 32.0 MICROINCHES LEFT SIDE; Surface Finish: 125.0 MICROINCHES BORE. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.