PartsTable
Technical Data Sheet
Download PDF

536235-3 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

536235-3: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.213 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, screw_material: ALUMINUM ALLOY 6061, fastener_length: 0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-406-1213, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
536235-3
NSN: 5305-01-406-1213
FSC: 5305 — Screws
CAGE: 58022 — R F PRODUCTS, INC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.213 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
screw_materialALUMINUM ALLOY 6061
fastener_length0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-406-1213
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 536235-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.213 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: ALUMINUM ALLOY 6061
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.213 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALALUMINUM ALLOY 6061
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
THREAD CLASS2A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 536235-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 536235-3?
536235-3 is a SCREW,MACHINE.
What is the NSN for 536235-3?
536235-3 is cataloged in the U.S. Government catalog under NSN 5305-01-406-1213. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 536235-3