PartsTable
Technical Data Sheet
Download PDF

5361663 ITEM 132 — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5361663 ITEM 132: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYIMIDE OVERALL, construction: ONE-PIECE, overall_length: 6.000 INCHES NOMINAL IN, style_designator: STRIP, attachment_method: ROUND HOLE, cross-sectional_width: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-377-2480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5361663 ITEM 132
NSN: 5330-01-377-2480
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialPLASTIC POLYIMIDE OVERALL
constructionONE-PIECE
overall_length6.000 INCHES NOMINAL IN
style_designatorSTRIP
attachment_methodROUND HOLE
cross-sectional_width0.062 INCHES NOMINAL IN
cross-sectional_height0.188 INCHES NOMINAL IN
attachment_hole_diameter0.250 INCHES NOMINAL IN
attachment_feature_quantity3
cross-sectional_shape_styleRECTANGULAR
NSN5330-01-377-2480
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5361663 ITEM 132 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
ATTACHMENT FEATURE QUANTITY: 3
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRIP
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL: PLASTIC POLYIMIDE OVERALL
TECHNICAL CHARACTERISTICS
ATTACHMENT HOLE DIAMETER0.250 INCHES NOMINAL IN
ATTACHMENT FEATURE QUANTITY3
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.062 INCHES NOMINAL IN
STYLE DESIGNATORSTRIP
OVERALL LENGTH6.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIALPLASTIC POLYIMIDE OVERALL
CONSTRUCTIONONE-PIECE
ATTACHMENT METHODROUND HOLE
SUBSTITUTES & CROSS-REFERENCES 1
171783-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5361663 ITEM 132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5361663 ITEM 132?
5361663 ITEM 132 is a SEAL,NONMETALLIC STRIP.
What parts can replace 5361663 ITEM 132?
There is 1 known substitute for 5361663 ITEM 132: 171783-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 5361663 ITEM 132?
5361663 ITEM 132 is cataloged in the U.S. Government catalog under NSN 5330-01-377-2480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5361663 ITEM 132