PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5361662 ITEM 34

5361662 ITEM 34 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 1.018 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN, fastener_length: 1.210 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5305-01-099-8973, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5361662 ITEM 34
NSN: 5305-01-099-8973
FSC: 5305
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class3A A
thread_length1.018 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN
fastener_length1.210 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_diameter0.500 INCHES IN
minimum_tensile_strength120000 POUNDS PER SQUARE INCH LBS
NSN5305-01-099-8973
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5361662 ITEM 34 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.210 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY SURFACE FINISH
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 5 GRADE
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
•
MINIMUM YIELD STRENGTH: 90000 POUNDS PER SQUARE INCH LBS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 CL FE/ZN 13 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.210 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN
SURFACE TREATMENTZINC AND CHROMATE OVERALL
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY SURFACE FINISH
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 5 GRADE
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM YIELD STRENGTH90000 POUNDS PER SQUARE INCH LBS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 CL FE/ZN 13 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
M1222B2X7C272GFNNInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-DTL-1222 TY 1 GR 5InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FFB571TYPEA7InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FF-S-85 TY 2 ST 10P GR 2InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
MIL-S-001222InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5361662 ITEM 34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5361662 ITEM 34?
5361662 ITEM 34 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 5361662 ITEM 34?
There are 5 known substitutes for 5361662 ITEM 34: M1222B2X7C272GFNN, MIL-DTL-1222 TY 1 GR 5, FFB571TYPEA7 and 2 more. Substitute compatibility should be verified for your specific system.
Is 5361662 ITEM 34 still available?
5361662 ITEM 34 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5361662 ITEM 34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026