The Spring,helical,torsion, cataloged under National Stock Number 5360-01-395-1606, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. The manufacturer of record is Goodrich Corporation. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-01-395-1606 |
| Primary Part Number | 2010626-3 |
| Item Name | Spring,helical,torsion |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Manufacturer | Goodrich Corporation |
| Status | ACTIVE |
| Spring Free Outside Diameter | 0.718 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| End Style | PARALLEL BOTH ENDS |
| End Length | 0.560 INCHES NOMINAL BOTH ENDS IN |
| Supplementary Features | SPRING SHALL OPERATE OVER A .500 DIA. PIN THRU TOTAL DEFLECTION OF 100 DEG |
| Style Designator | DOUBLE TORSION, RIGHT AND LEFT HAND |
| Material Document and Classification | QQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Spring Free Length | 1.440 INCHES NOMINAL IN |
| Inside Diameter | 0.580 INCHES NOMINAL IN |
| Stock Diameter | 0.069 INCHES NOMINAL IN |
| End Length From First Bend to Second Bend or End | 0.270 INCHES NOMINAL BOTH ENDS IN |
| Coil Quantity | 4 |
| End Length From Coil Axis to First Bend | 0.290 INCHES NOMINAL BOTH ENDS IN |
| Surface Treatment | PASSIVATE OVERALL |
| Center Loop Radius | 16.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM IN |
| Coil Helix Direction | RIGHT-HAND OR LEFT-HAND |
| Center Style | U TYPE |
| Material | STEEL COMP 302 OVERALL |
| End Length From Second Bend to Third Bend or End | 0.600 INCHES NOMINAL BOTH ENDS IN |
| End Angular Relationship | END W/LH HELIX OF COIL PARALLEL TO CENTER SECTION OR END W/RH HELIX OF COIL PARALLEL TO CENTER SECTION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 2010626-3 PRIMARY | Goodrich Corporation (USA) |
| Reference | Meaning |
|---|---|
| 2010626-3 | 3/9 Design control — primary reference Goodrich Corporation Div Advanced Structures Landing Systems |
| 2010626-3 | 5/9 Secondary reference Goodrich Corp Dba Goodrich Corp |
NSN 5360-01-395-1606 is a Spring,helical,torsion, manufactured by Goodrich Corporation, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
NSN 5360-01-395-1606 has 1 manufacturer part number on file: 2010626-3 (Goodrich Corporation).
Key specifications for 2010626-3: Spring Free Outside Diameter: 0.718 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; End Style: PARALLEL BOTH ENDS; End Length: 0.560 INCHES NOMINAL BOTH ENDS IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.