The Spring,helical,compression, cataloged under National Stock Number 5360-01-390-0351, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-01-390-0351 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Status | ACTIVE |
| Load Rating | 0.500 POUNDS MINIMUM AND 0.600 POUNDS MAXIMUM LBS |
| End Style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| Spring Solid Length | 0.450 INCHES NOMINAL IN |
| Supplementary Features | HEAT TREAT AFTER FORMING IN ACCORDANCE W/SPEC HT-29; SPG DEFLECTION RATE BETWEEN LENGTHS 0.4 AND 0.5 INCHES IN |
| Style Designator | CYLINDRICAL |
| Material Document and Classification | QQ-W-423, COMP FS COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Spring Free Length | 0.720 INCHES NOMINAL IN |
| Spring Deflection Rate | 2.000 POUNDS PER INCH NOMINAL LBS |
| Inside Diameter | 0.135 INCHES NOMINAL IN |
| Stock Diameter | 0.016 INCHES NOMINAL IN |
| Spring Length Under Load | 0.450 INCHES NOMINAL IN |
| Coil Quantity | 12-1/2 |
| Coil Helix Direction | LEFT-HAND OR RIGHT-HAND |
| Material | STEEL COMP 302 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 662698 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5360-01-390-0351 is a Spring,helical,compression, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
Key specifications for 5360-01-390-0351: Load Rating: 0.500 POUNDS MINIMUM AND 0.600 POUNDS MAXIMUM LBS; End Style: SPRING END,SQUARED AND GROUND BOTH ENDS; Spring Solid Length: 0.450 INCHES NOMINAL IN; Supplementary Features: HEAT TREAT AFTER FORMING IN ACCORDANCE W/SPEC HT-29; SPG DEFLECTION RATE BETWEEN LENGTHS 0.4 AND 0.5 INCHES IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.