The Spring,helical,compression, cataloged under National Stock Number 5360-01-334-1484, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-01-334-1484 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Status | ACTIVE |
| Spring Free Outside Diameter | 0.443 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| End Style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| Style Designator | CYLINDRICAL |
| Material Document and Classification | ASTM A313 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Spring Free Length | 0.700 INCHES NOMINAL IN |
| Spring Deflection Rate | 0.660 POUNDS PER INCH NOMINAL LBS |
| Inside Diameter | 0.417 INCHES NOMINAL IN |
| Coil Quantity | 7 |
| Surface Treatment | PASSIVATE OVERALL |
| Coil Helix Direction | RIGHT-HAND OR LEFT-HAND |
| Material | STEEL COMP 302 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 53-10192 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5360-01-334-1484 is a Spring,helical,compression, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 1005-01-697-8470. Verify interchangeability with system specifications before substitution.
Key specifications for 5360-01-334-1484: Spring Free Outside Diameter: 0.443 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; End Style: SPRING END,SQUARED AND GROUND BOTH ENDS; Style Designator: CYLINDRICAL. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.