The Spring,helical,compression, cataloged under National Stock Number 5360-01-302-7733, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-01-302-7733 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Status | ACTIVE |
| Spring Free Outside Diameter | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837,TYPE 1,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| End Style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| Spring Solid Length | 0.575 INCHES MAXIMUM IN |
| Style Designator | CYLINDRICAL |
| Material Document and Classification | AMS 6450 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Spring Free Length | 1.320 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN |
| Spring Deflection Rate | 47.900 POUNDS PER INCH MINIMUM AND 48.100 POUNDS PER INCH MAXIMUM LBS |
| Inside Diameter | 0.212 INCHES NOMINAL IN |
| Coil Quantity | 13 |
| Surface Treatment | CADMIUM OVERALL |
| Coil Helix Direction | RIGHT-HAND |
| Material | STEEL COMP 6150 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 116147-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5360-01-302-7733 is a Spring,helical,compression, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
Key specifications for 5360-01-302-7733: Spring Free Outside Diameter: 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-8837,TYPE 1,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; End Style: SPRING END,SQUARED AND GROUND BOTH ENDS; Spring Solid Length: 0.575 INCHES MAXIMUM IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.