The Spring,helical,compression, cataloged under National Stock Number 5360-01-195-4180, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. The manufacturer of record is Pall Aeropower Corporation. Government technical data includes 8 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-01-195-4180 |
| Primary Part Number | AA-2100-10D6 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Manufacturer | Pall Aeropower Corporation |
| Status | ACTIVE |
| Spring Free Outside Diameter | 0.535 INCHES MINIMUM AND 0.545 INCHES MAXIMUM IN |
| End Style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| Spring Solid Length | 0.270 INCHES MAXIMUM IN |
| Style Designator | CYLINDRICAL |
| Spring Free Length | 1.100 INCHES NOMINAL IN |
| Spring Deflection Rate | 9.700 POUNDS PER INCH MAXIMUM LBS |
| Inside Diameter | 0.449 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN |
| Coil Helix Direction | RIGHT-HAND OR LEFT-HAND |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AA-2100-10D6(100) | Pall Gmbh (DEU) |
| AA-2100-10D6(100) | Pall Aeropower Corporation (USA) |
| AA-2100-10D6 | Pall Gmbh (DEU) |
| AA-2100-10D6 PRIMARY | Pall Aeropower Corporation (USA) |
NSN 5360-01-195-4180 is a Spring,helical,compression, manufactured by Pall Aeropower Corporation, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
NSN 5360-01-195-4180 has 4 manufacturer part numbers on file: AA-2100-10D6(100) (Pall Gmbh), AA-2100-10D6(100) (Pall Aeropower Corporation), AA-2100-10D6 (Pall Gmbh), AA-2100-10D6 (Pall Aeropower Corporation).
Key specifications for AA-2100-10D6: Spring Free Outside Diameter: 0.535 INCHES MINIMUM AND 0.545 INCHES MAXIMUM IN; End Style: SPRING END,SQUARED AND GROUND BOTH ENDS; Spring Solid Length: 0.270 INCHES MAXIMUM IN; Style Designator: CYLINDRICAL. 8 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.