The Spring,helical,compression, cataloged under National Stock Number 5360-01-119-9915, is classified within Federal Supply Class 5360 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Hamilton Sundstrand Corporation. Government technical data includes 10 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 5 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-01-119-9915 |
| Primary Part Number | 710041 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — No Item Name Available |
| Manufacturer | Hamilton Sundstrand Corporation |
| Status | ACTIVE |
| Inside Diameter | 0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN |
| Material | STEEL COMP 631 OVERALL |
| End Style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| Coil Quantity | 6 |
| Spring Solid Length | 0.138 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5673 ASSN STD SINGLE MATERIAL RESPONSE OR MS 5678 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Coil Helix Direction | RIGHT-HAND |
| Style Designator | CYLINDRICAL |
| Spring Deflection Rate | 7.300 POUNDS PER INCH NOMINAL LBS |
| Spring Free Outside Diameter | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 710041 PRIMARY | Hamilton Sundstrand Corporation (USA) |
NSN 5360-01-119-9915 is a Spring,helical,compression, manufactured by Hamilton Sundstrand Corporation, classified under FSC 5360 (No Item Name Available). Status: active.
NSN 5360-01-119-9915 has 1 cross-referenced part number: 710041 (Hamilton Sundstrand Corporation).
There are 5 known substitutes for 5360-01-119-9915: 3110-00-100-0334, 3110-00-100-2342, 5935-00-503-9922 and 2 more. Verify interchangeability with system specifications before substitution.
Key specifications for 710041: Inside Diameter: 0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN; Material: STEEL COMP 631 OVERALL; End Style: SPRING END,SQUARED AND GROUND BOTH ENDS; Coil Quantity: 6. 10 total characteristics are documented in the Federal Logistics Information System.