The Spring,helical,torsion, cataloged under National Stock Number 5360-01-075-7714, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-01-075-7714 |
| Item Name | Spring,helical,torsion |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Status | ACTIVE |
| Spring Free Outside Diameter | 4.7 MILLIMETERS MINIMUM AND 4.9 MILLIMETERS MAXIMUM MM |
| End Style | STRAIGHT BEND END (RIGHT) OVERALL |
| End Length | 12.0 MILLIMETERS NOMINAL BOTH ENDS MM |
| Center Section Width | 7.5 MILLIMETERS NOMINAL MM |
| Style Designator | SINGLE TORSION RIGHT HAND |
| Spring Free Length | 11.0 MILLIMETERS MINIMUM AND 11.5 MILLIMETERS MAXIMUM MM |
| Coil Axis to Center Section Distance | 7.5 MILLIMETERS NOMINAL MM |
| Inside Diameter | 4.2 MILLIMETERS MINIMUM AND 4.4 MILLIMETERS MAXIMUM MM |
| End Length From First Bend to Second Bend or End | 2.5 MILLIMETERS NOMINAL OVERALL MM |
| Coil Helix Direction | RIGHT-HAND OR LEFT-HAND |
| Center Style | EYE CENTER |
| Material | STEEL OVERALL |
| End Angular Relationship | ENDS PARALLEL ONE TO OTHER |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 43642590001 | 3/9 Design control — primary reference Teac Corporation |
| 4364259001 | C/1 Advisory reference — outside the item-of-supply concept Zf Industrieantriebe Witten Gmbh |
NSN 5360-01-075-7714 is a Spring,helical,torsion, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
Key specifications for 5360-01-075-7714: Spring Free Outside Diameter: 4.7 MILLIMETERS MINIMUM AND 4.9 MILLIMETERS MAXIMUM MM; End Style: STRAIGHT BEND END (RIGHT) OVERALL; End Length: 12.0 MILLIMETERS NOMINAL BOTH ENDS MM; Center Section Width: 7.5 MILLIMETERS NOMINAL MM. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.