The Spring,helical,compression, cataloged under National Stock Number 5360-01-062-4719, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. The manufacturer of record is Myers F E Co Sub of Pentair Corp. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-01-062-4719 |
| Primary Part Number | 19605A |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Manufacturer | Myers F E Co Sub of Pentair Corp |
| Status | ACTIVE |
| Spring Free Outside Diameter | 0.934 INCHES NOMINAL IN |
| End Style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| Spring Solid Length | 0.360 INCHES MAXIMUM IN |
| Accommodated Rod Diameter | 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Style Designator | CYLINDRICAL |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Spring Free Length | 0.781 INCHES NOMINAL IN |
| Spring Deflection Rate | 68.200 POUNDS PER INCH NOMINAL LBS |
| Inside Diameter | 0.754 INCHES NOMINAL IN |
| Coil Quantity | 4 |
| Coil Helix Direction | RIGHT-HAND OR LEFT-HAND |
| Material | STEEL COMP 302 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 19605A PRIMARY | Myers F E Co Sub of Pentair Corp (USA) |
NSN 5360-01-062-4719 is a Spring,helical,compression, manufactured by Myers F E Co Sub of Pentair Corp, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
NSN 5360-01-062-4719 has 1 manufacturer part number on file: 19605A (Myers F E Co Sub of Pentair Corp).
Key specifications for 19605A: Spring Free Outside Diameter: 0.934 INCHES NOMINAL IN; End Style: SPRING END,SQUARED AND GROUND BOTH ENDS; Spring Solid Length: 0.360 INCHES MAXIMUM IN; Accommodated Rod Diameter: 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.