The Spring,helical,compression, cataloged under National Stock Number 5360-00-946-2828, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-00-946-2828 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Status | ACTIVE |
| Spring Free Outside Diameter | 0.510 INCHES NOMINAL IN |
| Load Rating | 19.600 POUNDS NOMINAL LBS |
| End Style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| Spring Solid Length | 0.800 INCHES MAXIMUM IN |
| Accommodated Rod Diameter | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Style Designator | CYLINDRICAL |
| Material Document and Classification | 17-7PH,ARMCO STEEL CORP MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Spring Free Length | 1.830 INCHES NOMINAL IN |
| Spring Deflection Rate | 19.000 POUNDS PER INCH NOMINAL LBS |
| Inside Diameter | 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN |
| Spring Length Under Load | 0.800 INCHES NOMINAL IN |
| Coil Quantity | 13 |
| Surface Treatment | PASSIVATE OVERALL |
| Coil Helix Direction | RIGHT-HAND OR LEFT-HAND |
| Material | STEEL CORROSION RESISTING OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3A032-12 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5360-00-946-2828 is a Spring,helical,compression, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
Key specifications for 5360-00-946-2828: Spring Free Outside Diameter: 0.510 INCHES NOMINAL IN; Load Rating: 19.600 POUNDS NOMINAL LBS; End Style: SPRING END,SQUARED AND GROUND BOTH ENDS; Spring Solid Length: 0.800 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.