The Spring,helical,compression, cataloged under National Stock Number 5360-00-774-1018, is classified within Federal Supply Class 5360 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Collins Engine Nozzles, Inc. Government technical data includes 10 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-00-774-1018 |
| Primary Part Number | 28775 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — No Item Name Available |
| Manufacturer | Collins Engine Nozzles, Inc |
| Status | ACTIVE |
| Inside Diameter | 0.130 INCHES MINIMUM IN |
| Material | STEEL OVERALL |
| Spring Free Outside Diameter | 0.296 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN |
| End Style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| Style Designator | TAPERED |
| Spring Length Under Load | 0.385 INCHES MINIMUM AND 0.415 INCHES MAXIMUM IN |
| Coil Helix Direction | RIGHT-HAND OR LEFT-HAND |
| Material Document and Classification | PS666-30,DELAVAN MFG CO. MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Spring Deflection Rate | 90.000 POUNDS PER INCH NOMINAL LBS |
| Load Rating | 2.000 POUNDS NOMINAL LBS |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 28775 PRIMARY | Collins Engine Nozzles, Inc (USA) |
NSN 5360-00-774-1018 is a Spring,helical,compression, manufactured by Collins Engine Nozzles, Inc, classified under FSC 5360 (No Item Name Available). Status: active.
NSN 5360-00-774-1018 has 1 cross-referenced part number: 28775 (Collins Engine Nozzles, Inc).
There are 2 known substitutes for 5360-00-774-1018: 3040-01-152-9269, 5905-01-186-3801. Verify interchangeability with system specifications before substitution.
Key specifications for 28775: Inside Diameter: 0.130 INCHES MINIMUM IN; Material: STEEL OVERALL; Spring Free Outside Diameter: 0.296 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN; End Style: SPRING END,SQUARED AND GROUND BOTH ENDS. 10 total characteristics are documented in the Federal Logistics Information System.