The Spring,helical,compression, cataloged under National Stock Number 5360-00-731-3885, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-00-731-3885 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Status | ACTIVE |
| Spring Free Outside Diameter | 0.209 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| Load Rating | 10.890 POUNDS MINIMUM AND 12.890 POUNDS MAXIMUM LBS |
| End Style | SPRING END,GROUND BOTH ENDS |
| Spring Solid Length | 0.128 INCHES MAXIMUM IN |
| Style Designator | CYLINDRICAL |
| Material Document and Classification | MIL-W-13604-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Spring Free Length | 2.015 INCHES NOMINAL IN |
| Spring Deflection Rate | 64.000 POUNDS PER INCH NOMINAL LBS |
| Inside Diameter | 0.145 INCHES NOMINAL IN |
| Spring Length Under Load | 0.188 INCHES NOMINAL IN |
| Coil Quantity | 4 |
| Coil Helix Direction | RIGHT-HAND OR LEFT-HAND |
| Bore Diameter | 0.214 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN |
| Material | STEEL COMP 1085 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7313885 | 3/9 Design control — primary reference Springfield Armory |
NSN 5360-00-731-3885 is a Spring,helical,compression, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
Key specifications for 5360-00-731-3885: Spring Free Outside Diameter: 0.209 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN; Load Rating: 10.890 POUNDS MINIMUM AND 12.890 POUNDS MAXIMUM LBS; End Style: SPRING END,GROUND BOTH ENDS; Spring Solid Length: 0.128 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.