The Spring,helical,compression, cataloged under National Stock Number 5360-00-511-4800, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-00-511-4800 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Status | ACTIVE |
| Spring Free Outside Diameter | 0.770 INCHES NOMINAL0.770 INCHES NOMINAL IN |
| End Style | SPRING END,SQUARED AND GROUND BOTH ENDSSPRING END,SQUARED AND GROUND BOTH ENDS |
| Spring Solid Length | 0.840 INCHES NOMINAL0.840 INCHES NOMINAL IN |
| Accommodated Rod Diameter | 0.620 INCHES NOMINAL0.620 INCHES NOMINAL IN |
| Style Designator | CYLINDRICALCYLINDRICAL |
| Material Document and Classification | AN-W-17 MIL SPEC SINGLE MATERIAL RESPONSE OVERALLAN-W-17 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Spring Free Length | 3.500 INCHES NOMINAL3.500 INCHES NOMINAL IN |
| Spring Deflection Rate | 2.000 POUNDS PER INCH MINIMUM AND 2.000 POUNDS PER INCH MINIMUM AND 2.500 POUNDS PER INCH MAXIMUM2.500 POUNDS PER INCH MAXIMUM LBS |
| Inside Diameter | 0.652 INCHES NOMINAL0.652 INCHES NOMINAL IN |
| Coil Quantity | 1414 |
| Coil Helix Direction | RIGHT-HANDRIGHT-HAND |
| Bore Diameter | 0.779 INCHES NOMINAL0.779 INCHES NOMINAL IN |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 450448 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5360-00-511-4800 is a Spring,helical,compression, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
Key specifications for 5360-00-511-4800: Spring Free Outside Diameter: 0.770 INCHES NOMINAL0.770 INCHES NOMINAL IN; End Style: SPRING END,SQUARED AND GROUND BOTH ENDSSPRING END,SQUARED AND GROUND BOTH ENDS; Spring Solid Length: 0.840 INCHES NOMINAL0.840 INCHES NOMINAL IN; Accommodated Rod Diameter: 0.620 INCHES NOMINAL0.620 INCHES NOMINAL IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.