The Spring,helical,torsion, cataloged under National Stock Number 5360-00-327-1019, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-00-327-1019 |
| Item Name | Spring,helical,torsion |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Status | ACTIVE |
| Spring Free Outside Diameter | 0.838 INCHES NOMINAL IN |
| End Style | OFFSET HALF LOOP, LEFT END BOTH ENDS |
| End Length | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM BOTH ENDS IN |
| Center Section Width | 0.310 INCHES NOMINAL IN |
| Style Designator | SINGLE TORSION RIGHT HAND |
| Material Document and Classification | MIL-W-6101 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Spring Free Length | 1.060 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN |
| Spring Deflection Rate | 24.000 POUNDS PER INCH NOMINAL LBS |
| Coil Axis to Center Section Distance | 1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN |
| Inside Diameter | 0.690 INCHES NOMINAL IN |
| Coil Quantity | 8 |
| Surface Treatment | CADMIUM OVERALL |
| Center Loop Radius | 0.155 INCHES NOMINAL IN |
| Coil Helix Direction | RIGHT-HAND OR LEFT-HAND |
| Center Style | U TYPE |
| Material | STEEL OVERALL |
| End Angular Relationship | ENDS PARALLEL ONE TO OTHER |
| Hook Radius | 0.120 INCHES NOMINAL BOTH ENDS IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 20-41191-3 | 3/9 Design control — primary reference The Boeing Company Div Defense |
NSN 5360-00-327-1019 is a Spring,helical,torsion, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
Key specifications for 5360-00-327-1019: Spring Free Outside Diameter: 0.838 INCHES NOMINAL IN; End Style: OFFSET HALF LOOP, LEFT END BOTH ENDS; End Length: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM BOTH ENDS IN; Center Section Width: 0.310 INCHES NOMINAL IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.