The Spring,helical,compression, cataloged under National Stock Number 5360-00-321-6458, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-00-321-6458 |
| Primary Part Number | 7609865 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Spring Free Outside Diameter | 6.250 INCHES MINIMUM AND 6.500 INCHES MAXIMUM IN |
| End Style | SPRING END,GROUND BOTH ENDS |
| Spring Solid Length | 14.000 INCHES MAXIMUM IN |
| Style Designator | CONVEX |
| Material Document and Classification | QQ-S-624-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Spring Free Length | 23.250 INCHES NOMINAL IN |
| Spring Deflection Rate | 470.000 POUNDS PER INCH NOMINAL LBS |
| Inside Diameter | 3.000 INCHES NOMINAL IN |
| Coil Quantity | 15-1/5 |
| Coil Helix Direction | RIGHT-HAND OR LEFT-HAND |
| Material | STEEL COMP 8655 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7609865 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
NSN 5360-00-321-6458 is a Spring,helical,compression, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
NSN 5360-00-321-6458 has 1 manufacturer part number on file: 7609865 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 7609865: Spring Free Outside Diameter: 6.250 INCHES MINIMUM AND 6.500 INCHES MAXIMUM IN; End Style: SPRING END,GROUND BOTH ENDS; Spring Solid Length: 14.000 INCHES MAXIMUM IN; Style Designator: CONVEX. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.