The Spring,helical,compression, cataloged under National Stock Number 5360-00-201-0171, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5360-00-201-0171 |
| Item Name | Spring,helical,compression |
| FSC / FSG | 5360 / 53 — Coil, Flat, Leaf, and Wire Springs |
| Status | ACTIVE |
| Spring Free Outside Diameter | 0.348 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN |
| Material Hardness Rating | 48.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM |
| End Style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| Style Designator | CYLINDRICAL |
| Spring Free Length | 0.758 INCHES NOMINAL IN |
| Spring Deflection Rate | 45.000 POUNDS PER INCH NOMINAL LBS |
| Inside Diameter | 0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN |
| Coil Quantity | 7-1/2 |
| Coil Helix Direction | LEFT-HAND |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| K5228016 | 5/9 Secondary reference Korody-Colyer Corp a Cr Industries Co |
| 5228016 | 5/9 Secondary reference General Motors Corp Electro-Motive Div |
| 35-5228016 | 5/9 Secondary reference Lift Parts Mfg Co Inc Div of Echlin Mfg Co the |
| 5228016 | 5/9 Secondary reference Rolls-Royce Solutions America Inc |
| 5228016 | 3/9 Design control — primary reference General Motors Corp Rochester Products Div |
NSN 5360-00-201-0171 is a Spring,helical,compression, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.
Key specifications for 5360-00-201-0171: Spring Free Outside Diameter: 0.348 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN; Material Hardness Rating: 48.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM; End Style: SPRING END,SQUARED AND GROUND BOTH ENDS; Style Designator: CYLINDRICAL. 10 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.